Bluetoothiga aktiivkõlar Alto TS 215 W

470,92  €
Hind km-ga: Jah Ei

Korvi lisatud toodetele saab ka paari klikiga küsida nimelise ja ametliku hinnapakkumise, soovi korral koos paigaldusega.

  • Eesti piires on kohaletoimetamine tasuta

Suure jõudluse, hea helipildi ning bluetooth ühendusega aktiivkõlar muusika esitamiseks ning kõnevõimenduseks suuremates ruumides ning välitingimustes.

Seadmel on madalad jõulised bassid ning selged ja teravad kõrghelid nii juhtmega ühendust kui ka bluetoothi kasutades. Kõlaril on 550W continous, 1100W peak digivõimendus, mille abil saavutatakse 129 dB maksimaalne helirõhk (126 dB continous) ning taasesitatav sagedusriba on 50 – 20.000 Hz @ +/- 3 dB

Seadmel on ka kahe helisisendi kokkumiksimise võimalus, ground-lift lüliti voolust tekkida võivate urinate vältimiseks ja M10 riputuspunktid. Kõlari kaal on tehnilisi näitajaid arvestades väga väike – 14,9 kg – tehes transpordi mugavaks.

Terve Eesti piires on kohaletoomine tasuta.

Allpool olev info on pärit tootja kodulehelt:

tehnilised andmed: Alto-Professional-TS215-Spec-Sheet

kasutusjuhend: TS2Series-UserGuide-v1.02

1100-WATT 15-INCH 2-WAY POWERED LOUDSPEAKER
  • 550W continuous, 1100W peak Class D power
  • 15-inch (381 mm) LF driver, 2.5-inch (63.5 mm) high-temperature voice coil
  • 1-inch (25.4 mm) neodymium HF driver with precision waveguide
  • Bi-amplified design with precision active crossover and EQ
  • Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs and independent level controls
  • Custom engineered high-efficiency class D amplifiers with passive cooling design – No fan means the speaker runs cleaner, quieter and has greater long-term reliability
  • Ground-Lift switch
  • Contour switch for increased EQ control
  • Electronic clip, thermal and transducer overdrive protection
  • Compact, lightweight, trapezoidal cabinet design for easy transport and installation
  • Angled rear panel for wedge monitor applications
  • Stand and pole-mountable with integral M10 suspension points
  • XLR Link output
  • Designed and tuned in the USA

The new Truesonic TS2 product range is the result of a clean-sheet approach to designing professional speakers that strike an ideal balance between no-compromise acoustic performance, the complete array of features that users demand and outstanding ergonomics and utility—all coupled with a stunning new industrial design.

Our TS2 family builds upon the amazing success and wide acceptance of our current TS1 series. The current Truesonics established a benchmark for clarity, high output, flexible I/O options and value that has made them the worldwide standard of comparison.

Now, with the TS2’s, we’ve significantly eclipsed that level of achievement.

The range is comprised of three models, the TS210, TS212 and TS215. The amplifiers in all three are rated at 550 watts continuous, 1100 watts peak—a significant increase over the previous line. This new higher power capability ensures greater output for use in larger spaces, with increased clarity, since the amplifiers won’t “run out of steam” and distort the way less powerful units will.

The all-new industrial design is more than just beautiful: The TS212 and TS215 have five integrated handles and the TS210 has two, making them easy to pick up in either H or V orientation. Each model also employs professional-grade M10 rigging/suspension points. The tough, durable cabinets have excellent acoustic properties, while their light weight makes them easy to transport.

Because of their cutting-edge, high-efficiency amplifiers, these speakers run at far lower temperatures than conventional amplifiers, even during extended periods of high output. The ground-up design effort for these speakers enabled us to incorporate advanced amplifiers with superior heat-dissipation characteristics, eliminating the need for costly, noisy cooling fans. The result is a powered speaker system that is cleaner, quieter and more reliable.

Higher performance, unsurpassed utility and flexible I/O options, easy transportability and unparalleled value—you’ll find it all in the Alto Professional TS2 Series.

TECH INFORMATION

  • Output Power – 1100W peak (700 LF + 400 HF) / 550W continuous (350 LF + 200 HF)
  • Low Frequency – 15-inch (382 mm) woofer, 2-inch (51 mm) voice coil
  • High Frequency – 1-inch (25 mm) neodymium driver with precision waveguide
  • Crossover – 2kHz
  • Maximum SPL – 129 dB peak, 126 dB continuous (dB-SPL @ 1 m)
  • Frequency Response – 50 – 20 kHz (+/- 3 dB)
  • Frequency Range – 43 Hz – 22 kHz (-10 dB)
  • Coverage – 90° H x 60° V nominal
  • Connectors – (2) XLR + ¼-inch combo jack mic/line inputs, (1) XLR Mix output
  • Cabinet – Trapezoidal, injection-molded, polypropylene enclosure with perforated steel grille
  • Controls – Volume, power on/off with LED, clip limiter with LED, ground lift
  • Protection – Electronic clip, thermal and transducer overdrive protection
  • Power – AC Input: 100-120/220-240 V, 50/60 Hz, Fuse: 100-120 V T6.3AL AC250V/220-240 V T3.15AL AC250V
  • Dimensions (WxDxH): 15.6″ x 14.1″ x 25.7″ / 396 x 357 x 652 mm
  • Weight: 32.7 lbs. / 14.9 kg